How to distinguish the quality of buttons?
Jul 11, 2022
As an employee in the clothing industry, especially a purchaser of clothing accessories, it is necessary to understand the knowledge of clothing accessories. Today, the editor is here to introduce: how to distinguish the quality of buttons? What kind of button is a good button?
We generally judge the quality of buttons by this method, and the color fastness to rubbing; Uniform shape; The demoulding smoothness of the button body is good, and the cavity is flat and smooth; Fine workmanship... Such buttons are of good quality. Of course, for buttons made of different materials (such as resin buttons and shell buttons), there are different standards for judging and distinguishing the quality of buttons. For example, for hardware buttons, many people will weigh them to understand the "gold content".
Is there a more scientific and detailed method to identify the quality of buttons? Below, the editor of China Button trading network will share the methods, requirements and standards of button * * *.
Button selection method, requirements and standards:
1. Control sample or confirmation sample. Check whether the color and model are consistent with the sample;
2. The button surface shall be free of cracks, notches, irregularities and obvious scratches;
3. There is no crack and bubble on the face and back; No rotten edges and uneven thickness;
4. The pattern shall be free of obvious deformation, white eyes, white circles, etc;
5. Buttonholes shall be smooth and smooth; The needle eye shall be symmetrical and free of big eyes. In case of concealed eye buckle, the concealed eye groove shall be smooth without obvious bursting.
6. After electroplating or other process treatment, the effect should be uniform. If some special effects cannot be consistent, they can be packaged separately.
7. The color difference of buttons in the same batch shall not be lower than grade IV standard of gb250, and shall not be lower than grade III standard of gb250 compared with the incoming samples.
8. After the packaging, appearance / performance test required by the customer are all qualified, the sub packaging can be carried out. The certificate of conformity or other labels shall be put in the packaging. The quantity of packages shall be consistent with the specified quantity, and the actual quantity of each bag shall be consistent with the specified quantity. If it is found that the thickness is different or other reasons exceed the tolerance, all packages shall be scrapped.
9. The emergency button / Hood button / five claw button shall be tested before shipment to test the performance and usability of the button, and the customer shall be provided with the molding and test samples.







